Fall protection

Fall protection training was created by Ludus Global oriented to learning the safety and preventive measures, when working at height, as well as applying them in realistic situations.

Download technical sheet

The students must perform the task they are asked safely and avoiding risks.

The simulation is composed of different exercises that cover various fall prevention systems and dangerous situations.

Simulations of working at heights in addition to preparing PPE.

Fall protection training objectives

Identify and prevent dangers
Learning how to carry out different tasks at heights safely and avoiding risks.

Get comfortable with the equipment
Getting to know different dangerous situations, using and properly inspecting the different fall protection systems.

Evaluate learning
Testing the knowledge acquired by the student through both guided and autonomous practical exercises.

Normative

Our simulations have been checked by HSE technicians from all over the world, in order to avoid disagreements with the legislation, normative and procedures in different countries and customer companies.

Compatible

Compatible with

  • Pico 4 (wired mode)
  • Pico 4 enterprise (wired mode)
  • HP reverb G2
  • Oculust rift
  • Quest pro (wired mode)
  • Quest 2 (wired mode)
  • HTC Vive cosmos
  • HTC focus 3 pro (wired mode)
  • HTC focus plus (wired mode)
  • HTC vive xr elite (wired mode)
  • HTC vive pro
  • HTC vive
OBJETIVOS
Objetivos de la formación en trabajos de altura
prevent
Reconocer y prevenir peligros
Aprender a realizar distintas labores en altura de forma segura y evitando riesgos.
equipo
Familiarizarse con el equipo
Conocer diferentes situaciones de riesgo, utilizar e inspeccionar de forma correcta los distintos tipos de sistemas anticaídas.
examen
Evaluar lo aprendido
Poner a prueba al alumno en relación a los conocimientos adquiridos a través de ejercicios prácticos, tanto autónomos y supervisados.
Available exercises for fall protection

Simulations both in situations of work at height and preparation with different protective equipment

Identify and equip PPE
Guided exercise where the student must review and evaluate the state of the personal protective equipment depending on what the situation requires.
Check and choose PPE
The student puts to practice his theorical knowledge in an autonomous exercise, checking and choosing PPE, so they can be evaluated and corrected.
Ladder with lifeline
The student must complete the verification process and use of the lifeline, selecting PPE appropriately.
Horizontal lifeline

The student walks on a virtual deck and goes over the horizontal lifeline use procedure and necessary PPE in a guided exercise.

Ridge lifeline

Guided simulation where the student must follow the instructions for choosing adequate PPE and use a horizontal lifeline installed on an anti-sway ridge.

Ridge lifeline II

Guided simulation on a horizontal lifeline installed on an anti-sway ridge, stressing the use of the adjustable lanyard and anti-sway poles.

Risk situations

The student experiences in first person an accident when stepping on a skylight. The consequences of not taking precautions are shown.

Lifeline practice

The student puts to practice everything learned without any help, to determine if he is able to identify and avoid all the risks related to working at heights.

NORMAS
Trabajos en altura se basa en las siguientes normativas:
DIRECTIVAS Y NORMATIVA EUROPEA

89/391/CEE directiva marco de seguridad. 2016/425 sobre el marcado CE de los EPI. 2009/104/CE sobre equipos de trabajo. 2001/95/CE sobre seguridad general de los productos. 92/58/CEE sobre señalización. UNE-EN ISO 388 sobre guantes de protección mecánica. UNE-EN 1263-1 y 2 sobre redes de seguridad. UNE-EN 13374 sobre barandillas. EN ISO 20345 sobre calzado de seguridad. UNE-EN 397 sobre casco de seguridad. UNE-EN 361 sobre arneses anticaídas. UNE-EN 362 sobre conectores. UNE-EN 353-1 sobre anticaídas deslizante sobre líneas de anclaje vertical rígida. UNE-EN 795-C sobre línea de anclaje horizontal flexible. UNE-EN 358 sobre elementos de sujeción. UNE-EN 354 sobre elementos de amarre. UNE-EN 355 sobre absorbedores de energía.

LEGISLACION ESPAÑOLA

Ley de Prevención de Riesgos Laborales 31/ 95. R.D. 1627/ 97 sobre seguridad en obra de construcción. R.D. 1215/ 97 sobre seguridad en la utilización de equipos de trabajo. R.D. 314/ 06 sobre el código técnico de edificación. R.D. 773/ 97 sobre equipos de protección individual. R.D. 1644/ 08 sobre diseño y fabricación de máquinas. R.D. 1801/03 sobre seguridad general de los productos. R.D. 2177/ 04 sobre trabajos en altura, andamios, escaleras de mano y técnicas de acceso y posicionamiento mediante cuerdas. R. D. 485/ 97 sobre señalización de seguridad y salud en lugares de trabajo.

OTROS (NTP, GUIAS, ITC…)

NTP 202 sobre el riesgo de caída a distinto nivel. NTP 228 sobre cascos de seguridad. NTP 448 sobre trabajo en cubiertas. NTP 809 sobre dispositivos de anclaje. NTP 843 sobre dispositivos de anclaje de clase C. NTP 747, 882 y 1146 sobre guantes de protección mecánica. NTP 228 sobre casco de seguridad. NTP 188 y 511 sobre señalización. NTP 733 sobre criterios de selección de EPI. NTP 773 Y 813 sobre calzado de seguridad.